|
Information we need from you:
Color
Standard:
3"-2" Taper & 1.5Lb Foam -
$275
Deluxe:
4"-2" Taper & 1.5Lb Foam -
$325
|
|
New Spa Covers
When getting the measurements for
your spa cover, you should measure from lip to lip, or the outside dimension
of the acrylic which is the same as lip to lip. After you have a lip to lip
measurement add 1/2" to both the length and the width. This will give you a
1/4" of play all around your spa cover. Be sure to specify where the the
cover folds in half if your cover is not square, this is the hinge.
The taper is
the thickness of foam you want, our covers come in two different tapers,
3"-2" and 4"-2" being thickest in the center of the cover and tapering down
to 2" on the edge to increase water run-off. When choosing the foam
density you have the choice
of either 1.5lb or 2lb foam. For information on measuring the radius of
your corners click here or
you can simply trace your corner and bring it into the shop, we can measure
it for you. The skirt length is
the skirt that hangs below the
foam.
|
|
|
.JPG)
